Owner's Guide
Classic Oxford - functionality
NORMAL POSITION
- Ensure that crown is pushed in position 1.
SET THE TIME
- Pull crown out to position 2.
- Rotate to adjust the time.
- Push the crown back into position 1 and your watch is now all set.
If you have any questions or concerns, please contact us.
How to change strap
REMOVE STRAP
- Slide the spring-bar left (as illustrated) and lift the strap to remove from the watch case.
- follow the same for both sides.
ATTACH STRAP
- Align the left side of the spring-bar, and ensure the pin is securely inside.
- Slide the spring-bar left. While holding it, align the right side, and adjust the position until the strap locks into place.
If you have any questions or concerns, please contact us.